Whether you're aiming for the podium or simply want to finish a ride strongly, the Speedplay Aero road pedals are aerodynamically designed. They cut through the wind effortlessly, enabling you to increase your speed with less effort. The unique 3 - axis adjustability feature allows you to precisely position your cleats, micro - adjust your float up to 15 degrees, and lower the stack height for the most aerodynamic setup on your bike.
The slim cleats and rubber - textured surface offer enhanced stability when you walk in your road shoes off the bike. The combination of Speedplay Aero and Standard Tension Cleat creates an elegant and aerodynamic profile. This not only looks sleek on the bike but also reduces drag, making it easier to reach higher speeds.
The SPEEDPLAY pedals have a best - in - class stack height, which minimizes the material between your shoe and the spindle. This results in a solid connection and a more fluid power transfer with each pedal stroke. The Standard Tension Cleat can be adjusted fore - aft, left - right, and rotationally on the shoe's bottom, offering 0 - 15 degrees of float.
The 3 - axis adjustability and low stack height of the SPEEDPLAY Advanced Pedal System let riders customize their fit on the bike with a wide range of options. A lower stack height can boost power transfer and allow for a lower saddle height, reducing drag.
These pedals allow up to 15 degrees of float, enabling the heel to pivot around the pedal's center. This range of motion in the foot, lower leg, and knee enhances comfort and pedal efficiency.
The slim profile of the SPEEDPLAY Advanced Pedal System provides excellent cornering clearance. You can pedal with confidence, knowing your pedals won't hit the ground while taking tight corners.
The SPEEDPLAY AERO pedals come with a set of Standard Tension Cleats and cleat surrounds for an aerodynamic and walkable system. The SPEEDPLAY Advanced Pedal System is cross - cleat compatible. You can buy the Easy Tension Cleat (sold separately) for less resistance when unclipping.
Specification:
- Part Number: WFPRA1S53
- Physical Dimensions: 3.9' x 2' x 2'
- Shipping Weight: 1.18lb
- Box Dimensions: 5.9' x 2' x 3.9'
- Country of Origin: Vietnam
- Weight: 224g per pair
- Stack Height: 11.5mm (3 hole) 8.5 (4 hole)
- Q Factor: 53mm
- Body Material: Grivory
- Spindle Material: Stainless Steel
- Bearing Type: Triple Sealed Cartridge & Needle Bearings
- Cornering Clearance: 37°
- Max Rider Weight: No restriction
- Cleats: Standard Tension Included
- Release Angle: Micro Adjustable from 0° to 7.5°
- Pedal Float: Adjustable from 0° to 15°
- Cleat Fore - Aft Adjustability: Up to 13mm
- Cleat Left - Right Adjustability: Up to 8mm
- Walkable Cleat: Yes (adaptor included)
Using the Speedplay Aero pedals is a breeze. First, install the Standard Tension Cleats on the bottom of your road shoes. You can adjust the cleats fore - aft, left - right, and rotationally to find your most comfortable position. Then, clip your shoes into the pedals. You can micro - adjust the release angle from 0° to 7.5° and the pedal float from 0° to 15° according to your preference.
When walking off the bike, the rubber - textured cleats provide good stability. Just be careful not to damage the cleats on rough surfaces.
For maintenance, keep the pedals clean. You can use a soft brush and mild soap to clean the pedals and bearings. Check the bearings regularly for smooth operation. If you notice any unusual noise or resistance, it might be time to service the bearings. Also, make sure to tighten all the bolts and screws periodically to ensure a safe and secure ride. If you purchase the optional Easy Tension Cleat, install it following the included instructions for less resistance when unclipping.
