These full-coverage fenders are specially crafted for the wide 20-inch wheels commonly seen on e-bikes. They'll keep you dry as your wheels spin. PDW designed these fenders to work with e1.1 bikes featuring a Suntour suspension fork. But to make the front fender fit perfectly, you'll need to make some manual adjustments. Trim the front stay length a bit and use special adapters. These adapters screw into the back of your fork, providing a spot for the fender hardware. There's limited space between the stock front tire on the e1.1 and the fork bridge where you attach the front fender hanger. You might need to switch to a slightly smaller tire to create room for the fender. These fenders can fit up to 20x2.6-inch tires, as long as there's clearance between the tires and the frame/fork. They're made of tough polycarbonate to handle rough use. Alloy stays keep the fenders rigid, and all parts are bolted on for easy rebuilding.
Using these e-bike fenders is a breeze. First, if you're using them on an e1.1 bike with a Suntour suspension fork, make sure to adjust the front stay length by cutting it a little bit. Then, use the special adapters to attach the fender hardware to the back of the fork. If there's not enough space between the tire and the fork bridge, swap to a slightly smaller tire. When it comes to maintenance, these fenders are easy to take care of. Since they're made of tough polycarbonate, they can withstand a lot of abuse. But it's still a good idea to check them regularly for any signs of damage. If a part breaks, you can easily rebuild the fender because all the parts are bolted on. Just keep an eye on the alloy stays to make sure they're keeping the fenders rigid.
